117B Centre Punch 2.5mm / 3/32in

Sheet Metal Punch 32.5mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

Sheet Metal Punch 27.5mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

Sheet Metal Punch 22.5mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

Sheet Metal Punch 37.5mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

Sheet Metal Punch 76.5mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

TTPC09 Punch & Chisel Set

This Teng Tools 9 piece set contains 6 pin punches 2 cold chisels and a centre punch The tools are supplied in a handy moulded storage tray These striking tools are made of steel which is hardened to ensure a long working life The pin punches can be used to drive pins for affixing a fixture to a rotating shaft whereas the centre punch is ideal for marking the centre of a point as a guide for drill...

Number Punch Set 5mm

Faithfull Letter and number punches are used for hand marking metals and other hard materials They are useful for stamping personal identification or post codes on tools cycles etc as frequently recommended by police and insurers The letter or number sizes as shown relate to the height of the characters The punches are manufactured from high quality tested carbon steel with double induction harden...

Q.Max Sheet Metal Punch - 76.5mm

Size. 76. 5mm. Key Type. ME. 14mm hexagonal wrench A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered ...

Letter Punch Set 5mm

Faithfull Letter punches are used for hand marking metals and other hard materials They are useful for stamping personal identification or post codes on tools cycles etc as frequently recommended by police and insurers The letter sizes as shown relate to the height of the characters The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure hi...

TBT18 Tool Tray with Punch & Impact Driver Set 25pc

Contents: 1/2?Sq Drive Impact Driver, Hex Bits; 4, 5, 6, 8mm, Slotted Bits; 5, 6, 8, 10, 12mm, Phillips Bits; #1,# 2, #3, #4mm, Adaptor; 1/2?Sq Drive x 8mm Hex, Centre Punch #2 x 9.5 x 120mm, Taper Pin Punch ?3 x 9.5 x 120mm, Cold Chisel 12 x 9.5 x 130mm Utility Chisel 5 x 9.5 x 130mm, Parallel Pin Punches; ?2 x 8 x 115, ?3 x 8 x 125, ?4 x 9.5 x 150mm, ?5 x 9.5 x 165, ?6 x 12.7 x 180, ?8 x 12.7 x ...

TBT18 Tool Tray with Punch & Impact Driver Set 25pc

Contents: 1/2?Sq Drive Impact Driver, Hex Bits; 4, 5, 6, 8mm, Slotted Bits; 5, 6, 8, 10, 12mm, Phillips Bits; #1,# 2, #3, #4mm, Adaptor; 1/2?Sq Drive x 8mm Hex, Centre Punch #2 x 9.5 x 120mm, Taper Pin Punch ?3 x 9.5 x 120mm, Cold Chisel 12 x 9.5 x 130mm Utility Chisel 5 x 9.5 x 130mm, Parallel Pin Punches; ?2 x 8 x 115, ?3 x 8 x 125, ?4 x 9.5 x 150mm, ?5 x 9.5 x 165, ?6 x 12.7 x 180, ?8 x 12.7 x ...

Stanley 0-58-911 Dynagrip Nail Punch 0.8mm 1/32in

Stanley Dynagrip Nail Punch - Stanley 0-58-911, A comfortable Dynagrip sleeve surrounds a fully hardened body, which is precision milled for extra long life. The overall length is 25% longer than conventional nail punches, making it easy to set nails in hidden and hard to reach areas.Colour coded sleeves for easier identification of sizes.Tip Size: 1/32inLength: 5inColour. Yellow Sleeve Stanley 0-...

Stanley 0-58-913 Dynagrip Nail Punch 2.4mm 3/32in

Stanley Dynagrip Nail Punch - Stanley 0-58-913, A comfortable Dynagrip sleeve surrounds a fully hardened body, which is precision milled for extra long life. The overall length is 25% longer than conventional nail punches, making it easy to set nails in hidden and hard to reach areas.Colour coded sleeves for easier identification of sizes.Tip Size: 3/32inLength: 5inColour: Red Sleeve Stanley 0-58-...

Punch & Chisel Set 14 Piece

14 piece heavy-duty punch and chisel set Set contains 4 pin punches 1 centre punch 4 taper punches and 5 cold chisels Contents 4 x Pin punches 316 x 38 x 6in 18 x 38 x 5in 332 x 38 x 5in 14 x 12 x 6in 1 x Centre punch 18 x 38 x 5in 4 x taper punches 38 x 58 x 10in 532 x 12 x 9in 18 x 12 x 10in 18 x 38 x 8in 5 x Cold chisels 12 x 38 x 6in 58 x 12 x 7in 34 x 58 x 7in 78 x 58 x 8in 1 x 34 x 812in

S0805 Punch & Chisel Set 21pc

Manufactured from Chrome Vanadium steel, hardened and tempered for extra durability. Supplied in storage pouch. Contents: Cold Chisels; 10 x 140, 13 x 150, 16 x 170, 19 x 175, 22 x 200, 25 x 250mm, Taper Punch; 1.5 x 140, 2.4 x 140, 3 x 140, 4 x 140, 5 x 140, 6 x 140mm, Pin Punch; 1.5 x 150, 2.4 x 150, 3 x 150, 4 x 150, 5 x 150, 6 x 150mm, Centre Punch; 6 x 100, 6 x 140, 8 x 115mm.

RVFM PU1001 Auto Centre Punch

RVFM-Automatic-Centre-Punch-RVFM-PU1001-Automatic-centre-punch-round-shank-type-the-punch-is-pushed-against-the-work-piece-and-clicks-producing-an-indent-for-locating-the-tip-of-a-drill-the-click-spring-pressure-can-be-adjusted-by-rotating-the-knurled-top-to-suit-a-variety-of-material-hardnesses-automatic-centre-punch-for-marking-work-prior-to-drilling-RVFM-PU1001-Auto-Centre-Punch

S0805 Punch & Chisel Set 21pc

Manufactured from Chrome Vanadium steel, hardened and tempered for extra durability. Supplied in storage pouch. Contents: Cold Chisels; 10 x 140, 13 x 150, 16 x 170, 19 x 175, 22 x 200, 25 x 250mm, Taper Punch; 1.5 x 140, 2.4 x 140, 3 x 140, 4 x 140, 5 x 140, 6 x 140mm, Pin Punch; 1.5 x 150, 2.4 x 150, 3 x 150, 4 x 150, 5 x 150, 6 x 150mm, Centre Punch; 6 x 100, 6 x 140, 8 x 115mm.

Rennsteig 424 142 0 Taper Punch Set With Handguards In Plastic Case

Rennsteig-Taper-Punch-Set-With-Handguards-In-Plastic-Case-Rennsteig-Werkzeuge-424-142-0-This-set-of-6-taper-punches-with-handguards-from-Rennsteig-is-supplied-in-a-plastic-case-Made-of-chrome-vanadium-air-hardened-steel-the-set-includes-punches-with-a-diameter-of-1mm-2mm-3mm-4mm-and-5mm-plus-a-4mm-centre-punch-Rennsteig-424-142-0-Taper-Punch-Set-With-Handguards-In-Plastic-Case

Round Head Parallel Pin Punch 2.5mm (3/32in)

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch A 4 piece set is available and contains 3 4 5 and 6mm A 8 piece set is also available and contains 15 25 3 4 5 55 6 and 8mm

Junior Automatic Centre Punch

Fully automatic, high-grade automatic centre punch Manufactured from hardened alloy steel and fitted with a replaceable tip that's more than able of p The impact delivered by the punch is repeatable, allowing for uniform impressions to be made time a The chrome plated knurled brass body, ensures a long lasting centre punch perfect for a host of ind

Rennsteig 424 120 0 Taper Punch Set In Plastic Stand

Rennsteig Taper Punch Sets - Rennsteig Werkzeuge 424 120 0, This set of 6 taper punches from Rennsteig is supplied in a plastic stand. Made of chrome-vanadium air-hardened steel , the set includes punches with a diameter of 1mm, 2mm, 3mm, 4mm and 5mm, plus a 4mm centre punch. Rennsteig 424 120 0 Taper Punch Set In Plastic Stand