Centre Punch 6mm (1/4in)

Professional Bevel Edge Chisel 6mm (1/4in)

These Roughneck Professional Bevel Edge Chisels have high quality drop forged Chrome Vanadium blades for long life performance The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting The chisels have contoured comfortable handles for maximum control These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repe...

Stanley 0-16-251 FatMax Bevel Edge Chisel With Thru Tang 6mm (1/4in)

Stanley FatMax Bevel Edge Chisels with Thru Tang - Stanley 0-16-251, The Stanley FatMax Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability.The steel...

Sheet Metal Punch 1.3/4in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches boxed singly without key which should be ordered separately To use these punches they require a hole to b...

TTPC09 Punch & Chisel Set

This Teng Tools 9 piece set contains 6 pin punches 2 cold chisels and a centre punch The tools are supplied in a handy moulded storage tray These striking tools are made of steel which is hardened to ensure a long working life The pin punches can be used to drive pins for affixing a fixture to a rotating shaft whereas the centre punch is ideal for marking the centre of a point as a guide for drill...

Sweetheart Socket Chisel 6mm (1/4in)

The Stanley Sweetheart chisels are based on the original 750 series socket chisels Designed for striking and paring the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet It also provides a wide butt end or large sweet spot for striking accuracy They have high quality EN31 carbon steel blades with narrow side bevels which flatten and sharpen quick...

Sheet Metal Punch 1.1/4in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches boxed singly without key which should be ordered separately To use these punches they require a hole to b...

Stanley 1-16-782 Sweetheart Socket Chisel 6mm (1/4in)

Stanley Sweetheart Socket Chisels - Stanley 1-16-782, The Stanley Sweetheart chisels are based on the original 750 series socket chisels. Designed for striking and paring, the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet. It also provides a wide butt end, or large sweet spot, for striking accuracy.They have high quality EN31 carbon steel bla...

FatMax Bevel Edge Chisel with Thru Tang 6mm (1/4in)

The Stanley Fat Max Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle The ergonomic soft grip longer handle is useful for maximum control feels good in the hand and is comfortable in all applications The friction welded bolster also gives strength and durability The steel striking cap can be struck with a steel hammer for increased cutting for...

MS500 All-Purpose Chisel ProTouch Handle 6mm (1/4in)

The IRWIN Marples MS500 Series All-Purpose Chisels with Pro Touch Handle These chisels have a large metal striking cap to withstand hammer impacts prolong the life of the handle and prevent mushrooming Pro Touch handles are designed to provide extra comfort grip and also reduces vibrations and reduces hand fatigue One-piece blade forging gives added strength and durability Made from special tool s...

M444 Bevel Edge Chisel Blue Chip Handle 6mm (1/4in)

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles contoured for maximum control radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel tempered along the full length...

Bevel Edge Chisel Red Soft-Grip 6mm (1/4in)

This Faithfull chisel is a high quality chisel for the professional user and the keen DIY enthusiast The chisels blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards to ensure that the cutting edge remains sharper for longer The bevelled edge blade design makes the chisel ideal for both fine work and for cutting into tight corners The red...

M373 Bevel Edge Chisel Splitproof Handle 6mm (1/4in)

The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles They are made from best in category steel for improved sharpness and edge retention The Blade bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will with...

434 Bevel Edge Chisel 6mm (1/4in)

Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO process Has a two component grip splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel which are precision ground for maximum sharpness and long lasting performance With the exception of the 50mm wide blade the remaining chisels in the 434 range are supplied wit...

Stanley 0-16-870 Dynagrip Bevel Edge Chisel With Strike Cap 6mm (1...

Stanley Dynagrip Bevel Edge Chisels with Strike Cap - Stanley 0-16-870, Wood chisel with steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel reassurance of strength and durability and the pre-sharpened blade is ready for immediate use.Size 6mm (1/4 in) Stanley 0-16-870 Dynagrip Bevel Edge Chisel Wi...

Punch & Chisel Set 14 Piece

14 piece heavy-duty punch and chisel set Set contains 4 pin punches 1 centre punch 4 taper punches and 5 cold chisels Contents 4 x Pin punches 316 x 38 x 6in 18 x 38 x 5in 332 x 38 x 5in 14 x 12 x 6in 1 x Centre punch 18 x 38 x 5in 4 x taper punches 38 x 58 x 10in 532 x 12 x 9in 18 x 12 x 10in 18 x 38 x 8in 5 x Cold chisels 12 x 38 x 6in 58 x 12 x 7in 34 x 58 x 7in 78 x 58 x 8in 1 x 34 x 812in

RVFM PU1001 Auto Centre Punch

RVFM-Automatic-Centre-Punch-RVFM-PU1001-Automatic-centre-punch-round-shank-type-the-punch-is-pushed-against-the-work-piece-and-clicks-producing-an-indent-for-locating-the-tip-of-a-drill-the-click-spring-pressure-can-be-adjusted-by-rotating-the-knurled-top-to-suit-a-variety-of-material-hardnesses-automatic-centre-punch-for-marking-work-prior-to-drilling-RVFM-PU1001-Auto-Centre-Punch

Bosch 2608584777 Hole Saw Centre Drill TCT 120mmx1/4in Shank for P...

Bosch Hole Saw Centre Drills - Bosch 2608584777, Bosch tungsten carbide pilot drill bit 120mm, holesaws with cutting capacity up to 60mm, with 1/4" hex shank and 118° drill bit tip. Centred, special multi-purpose diamond-ground carbide tip. Compatible with Power-change adaptors. Bosch 2608584777 Hole Saw Centre Drill TCT 120mmx1/4in Shank for Power-change

424-P Bevel Edge Chisel 6mm (1/4in)

Carefully engineered bevel edged chisels to satisfy most professional requirements from smooth precision work to demanding carpentry applications The specially designed two-component handle maximises control and comfort-in-use The hardened and tempered blade is precision ground for maximum sharpness and long lasting performance and honed ready-to-use

Junior Automatic Centre Punch

Fully automatic, high-grade automatic centre punch Manufactured from hardened alloy steel and fitted with a replaceable tip that's more than able of p The impact delivered by the punch is repeatable, allowing for uniform impressions to be made time a The chrome plated knurled brass body, ensures a long lasting centre punch perfect for a host of ind

M750 Bevel Edge Chisel Splitproof Soft Touch 6mm (1/4in)

The IRWIN Marples M750 Split-proof pro bevel edge chisels have a carbon rich blade which is solid forged hardened and tempered up to the last inch for a long working life They have guaranteed splitproof handles that help to absorb harmful vibrations The chisels have a highly durable friction grip sturdy neck and bolster and are honed and sharpened

414 Bevel Edge Chisel 6mm (1/4in)

The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel which has been developed to achieve a high standard of performance Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance Polypropylene handle and with a protective holster included